A clogged main sewer requires a professional plumber to open the pipe that connects your home’s drains to the municipal sewer system. If you notice that your drainage problem is limited to one drain, you can probably solve your problem by clearing that drain with a drain coil or water jet. Often one drain becomes clogged or overloaded, preventing waste from that drain from entering the main sewer pipe. So if there is a blockage further down the line, the cleaning drain can easily become clogged.
What To Do When You Notice a Blockage
While you can’t clean up a blockage yourself, you can clean up any sewage and keep everyone away from contaminated areas. So if there is a blockage in this line, the sewage will not enter the public sewer network.
If you’re dealing with a clogged sink drain, you should first try using a plunger or snake. If the main drain in your home is clogged, the clog is most likely in your sewer line, there may be a large clog in your city sewer. If you don’t add water to your drainage system, you won’t worsen the problem. At the very least, a clogged main sewer pipe can cause sewage and raw sewage to accumulate through a drain on a basement floor or the floor of a house.
The first sign of a damaged or clogged main sewer is when you notice that multiple drains in your home are blocked. Sewer blockages occur in plumbing systems owned and operated in your city, town or region. Your sewer line (also called the main drain) starts where the pipe leaves your home and enters your city sewer line or septic system. The pipe runs from your house to the curb and then to the bottom of the street.
The mainline then leaves your house and connects to the city line, which starts on the street or alley. Each branch line connects and flows into your mainline like a tree trunk. Attempting to fix it myself was a failure as the mainline ran outside the house and connected to the main city line. Almost every line can be piped directly under the frame to branch and trunk lines and city lines.
The main sewer drains usually get clogged between the house and the street, and since the supports start at the obstacle and rise, the lower drains and fixtures are usually the first to back up. Sometimes other, more serious plumbing problems can mimic a sewer backup. Some sewer systems can be cleaned with a plunger or a bottle of cleaner, while others are more serious and require professional help. A clogged sewer drain can be a serious problem that could qualify as a plumbing emergency and a potential health hazard.
Broken pipes, tree roots and debris can build up in the sewer system and cause blockages. As the roots grow and expand, they can damage drains and cause blockages. Keep in mind that sewer pipes are about 6 inches in diameter, so it takes a lot of material to clog them.
Main sewer lines carry waste away from homes and businesses and can easily lead to sewer backup due to blockages in the right circumstances. Sewer blockages usually require strong suction and a long drain coil to get to the problem area.
And while you may be able to loosen small blockages using store-bought chemical sewage cleaners, you’ll find that larger blockages require the attention of a professional plumber who can inspect all sewer pipes to spot any blockages. This means that many of your drains and toilets may become clogged. While slow-draining sinks and clogged toilets are fairly common, multiple blockages on the same day are pretty rare unless something happens to the sewer line. If you notice that the toilets, kitchen and bathroom sinks, and tubs or showers in your home often don’t drain without using a plunger or a chemical drain cleaner, you may have a blockage in your main sewer line. If the sewer is blocked you should call Calgary Plumber and Drains to resolve the issue quickly and safely.