Sheds are popular places for storing equipment and tools in the backyard. To store hazardous products like chemicals, pesticides, or fuel, it provides an alternative to indoor storage, such as in a garage or outside shed.

You can easily install metal roofing and choose from a wide variety of options at a low cost because of its ease of installation and affordability. Furthermore, if you’re building a metal roof on your own, you’ll save even more money.

But doing such heavy stuff requires some expertise or good guidance, and surely I can help with the latter. So hang in there and find out what treasures I have in store for you.

How To Install Metal Roofing On A Shed: DIY Tips

If you are currently constructing a shed or probably already own one but now want to reconstruct it and don’t know how to, then a professional roofing company such as columbusroofingpros.com would be most suited to assist you with your roofing needs.

But if you wanna do it yourself, you’ll need to manage to get together a few items, and put on your working shoes.

You can build your roof using aluminum, zinc, steel, copper, tin, or any other corrugated metals. The costs of using metal roofing are much lower than those of using other roofing materials. This is due to the fact that the shed does not measure in width.

Materials That You Need

You’ll need the following items to install a metal roof:

1. Sheets of metal
2. Drill
3. Circular saw
4. Hammer and metal nails
5. A venting kit is required.
6. Screws
7. Flashing
8. Silicone sealant

How To Install Metal Roofing: 5 Easy Steps To Follow

1. To begin, remove any old shingles or roofing from your shed. Don’t forget to get rid of any stray nails or debris that may be on your roof. In this phase, you may additionally insulate the roof by adding plywood and placing a building paper to keep the roof dry.
2. Using a hammer and 1¼-inch nails, install an edging around the edge of the roof.
3. Starting with the metal roofing, place it vertically and hammer it in place after leaving a half-inch overhang over the edge of the roof structure. Secure the panel with the help of a screw and washer.

Add a second roofing panel. Keep the larger lip on above the smaller lip. Using a silicone sealant, apply it to the undersides of each panel. Using screws, fasten it in the same manner (vertically first following the edging line and then horizontally ). Remember to place the screw on the panel’s flat side.

Continue to the end of one slope, and then cut off any extra panel that remains. Repeat the same steps on the opposite side of the roof.

1. In order to add ventilation, you may cut a hole in any portion of the roof and then add ventilation.
2. Installing the flashing is the final step to complete the process. It is used to cover the junction of the two panels.

Advantages Of Metal Roofing On A Shed

1. Metal roofing has a longer lifespan, they usually last for 50 years whereas asphalt ones only last 20 at best.
2. More eco-friendly as you can recycle them.
3. Metal roofing gives your house more resale value as such roofing is more durable.
4. They are low maintenance, just look after them occasionally.
5. You can install a metal roof over a shingle roof.

Disadvantages of Metal roofing on a shed

1. Metal roofing requires a lot of financial investment. Much more than a shingle roof.
2. Hailstorms can dent a metal roofing.
3. Installation charges are higher than asphalt shingles.
4. You’ll need to color metal roofing every once in a while since they fade out.
5. Metal roofing needs special kinds of screws, so you’ll also need to purchase them.

Conclusion

If you’re trying to figure out how to put corrugated metal roofing on a shed, these methods may be able to help you out. It may be difficult, therefore it’s best to have a companion with you. You won’t regret installing a metal roof, and even if you decide to change it later on, knowing how to install a metal roof on a shed is a valuable life skill.