7 Things You Should Know About Vacuum Cleaner Repair in 2020

Introduction

People have to use a vacuum cleaner normally. This is the most important tip from many experts.

Pulling on the plug instead of the cable already prevents many problems.

Many people roll out the cable very tightly. This quickly causes defects in the reeling mechanism of the cable drum or on the cable in the device, and then a bigger problem arises.

Then the vacuum cleaner has to be taken apart. We see repairs in the Repair shop see many vacuum cleaners with cable and plug problems. Both can easily be avoided.

We here discuss some very common and usually occurred issues and how you can avoid them very easily just with following some caution.

Don’t panic; you don’t have to run to the nearest electronics store and buy a new one, we have helpful tips on how to get the beautiful vacuum cleaner back in shape very quickly.

Find the cause!

Vacuum cleaners fall in trouble in several ways; here, it is important to first define what the good one suffers from. Doesn’t he get stopped, does he keep going out, or does he leave deposits and hair?

Likewise, the suction power can be very limited, or it can spread an unpleasant smell.

There are little things behind most quirks that can be easily remedied yourself. We reveal how!

Disassembling

The biggest repair problem with vacuum cleaners is that they are difficult to disassemble. Because vacuum cleaners are mostly clicked into each other instead of screwed.

You have to know where to apply pressure, and it breaks easily. Repairs often don’t know where to start opening, it usually takes an hour to open, and the repair can then be done quickly.

Fortunately, you can find more vacuum repair tips and more videos about disassembly on YouTube if you look for the brand and model number.

The cause of vacuum cleaner problems often remains unclear.

In the database of the vacuum repair shop, which repairs what and how they repair, 16 percent of vacuum cleaners stated that the cause of the defect could not be determined.

Vacuum cleaners that are not broken are in the top 3 of the products most often brought to the Repair shop. The Repair shop shows that vacuum cleaners have good chances of being repaired.

Two-thirds of the repairs were successful, and 10 percent of the owners received advice in the Repair shop.

Many of the vacuum cleaners you brought with you are not broken.

Vacuum cleaners are often brought that have not been well maintained or those that have not been handled properly. The bag is often full, which results in a loss of suction.

No Suction

We ask visitors to first clean the vacuum cleaner and replace the bag. This often fixes many problems. If there is still no suction, check whether the hose is blocked: hold your hand on it, no airflow means blockage.

The blockage can usually be removed quite easily by poking, for example, with a knitting needle or a broomstick. This is one of common solutions that repair shops often use for problems with vacuum cleaners.

Often you don’t think of the simplest things. So, if the suction power decreases, in many cases, a full bag pet hair is responsible – just insert a new one, or you can go for a new vacuum with a limited budget as you can consider the list of best vacuum under 100 dollars.

Stopped

If the vacuum cleaner cannot be switched on, it is quite possible that the cable is not correctly inserted. It is also possible that not the vacuum cleaner but the socket is broken.

To check this, you can plug another device into the socket. If this does not work either, it is probably due to the socket. If the other device works, it is due to the vacuum cleaner, and you have to go a little deeper when troubleshooting.

The overheating

Some vacuum cleaners have an overheating problem, so if you have vacuumed for a long time, it is possible that the vacuum cleaner has become too hot and has therefore switched off. In this case, you should simply unplug the device and let it cool down for about 20 minutes.

Blockages can often lead to overheating. Before you want to put the vacuum cleaner back into operation, it is best to check everything for blockages in advance.

Blockages

In many cases, blockages are responsible for reduced suction power. For example, the intake manifold or the air inlets may be blocked. In order to remove blockages from the suction pipe, it is advisable to carefully pierce the suction pipe with a long rod.

If the blockage sits at the transition between the suction pipe and the vacuum cleaner bag and is not so easy to remove, then remove the vacuum cleaner bag, the blockage should then be easier to release. Always be careful not to damage the vacuum cleaner.

Blocked brush roller

If the vacuum cleaner is not vacuuming, this may also be due to a blocked brush roller. This can be blocked or defective due to objects getting stuck.

To check the brush roller, switch on the vacuum cleaner and look into the lower end, but never reach into it.

Blockages should only be removed when the device is switched off; the brush roller should also be serviced and cleaned from time to time.

If the brush roller is broken, it can usually be replaced individually.

Technical problems

In addition to these simpler solutions, the technology or the motor of the vacuum cleaner can, of course, also be faulty or defective. To venture here, you should already be a bit experienced.

The problem can be due to the timing belt, for example. These are relatively easy to change, but if the engine is damaged, it becomes more difficult, and repairs should only be carried out by a specialist.

Contact the manufacturer

It can often make sense to contact the manufacturer directly. These usually have hotlines in which the most common problems are known. The suggestions you get there may well make sense.

Conclusion

If all these tips do not help, then a visit to the electronics store or an electrical workshop will probably only help.

However, caution is required here, because repairs can often be more expensive than a new vacuum cleaner. In order to avoid high bills, you should always have a quote in advance and consider whether the repair is really worthwhile.

Of course, one should not forget the guarantee and warranty. The warranty is regulated by law and, in most cases, is 24 months.

If you are in this period, you should contact the manufacturer, who will then either have to repair the vacuum cleaner or replace it completely.

We hope to have helped with these tips and hope you enjoy vacuum cleaning!